Set Mac Unreserved-Flood - Enterasys G3G170-24 Cli Reference Manual

set mac unreserved-flood

Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
Example
This example displays the status of multicast flood protection.
G3(su)->show mac unreserved-flood
mac unreserved flood is disabled.
set mac unreserved-flood
Use this command to enable or disable multicast flood protection. When enabled, this prevents
policy profiles requiring a full 10 masks from being loaded.
Syntax
set mac unreserved-flood {disable | enable}
Parameters
disable | enable
Defaults
None.
Mode
Switch command, read‐write.
Usage
The following addresses will be forwarded when this function is enabled:
01:80:C2:00:00:11
01:80:C2:00:00:14
01:80:C2:00:00:15
The default state is disabled, and these addresses will not be forwarded.
Example
This example enables multicast flood protection.
G3(su)->set mac unreserved-flood enable
11-24 Logging and Network Management
Disables or enables multicast flood protection.