Snmp Configuration Summary; Snmpv1 And Snmpv2C - Enterasys G3G170-24 Cli Reference Manual

This chapter describes the Simple Network Management Protocol (SNMP) set of commands and
how to use them.
For information about...

SNMP Configuration Summary

Reviewing SNMP Statistics
Configuring SNMP Users, Groups, and Communities
Configuring SNMP Access Rights
Configuring SNMP MIB Views
Configuring SNMP Target Parameters
Configuring SNMP Target Addresses
Configuring SNMP Notification Parameters
Creating a Basic SNMP Trap Configuration
SNMP Configuration Summary
SNMP is an application‐layer protocol that facilitates the exchange of management information
between network devices. SNMP enables network administrators to manage network
performance, find and solve network problems, and plan for network growth.
G‐Series devices support three versions of SNMP:
• Version 1 (SNMPv1) — This is the initial implementation of SNMP. Refer to RFC 1157 for a
full description of functionality.
• Version 2 (SNMPv2c) — The second release of SNMP, described in RFC 1907, has additions
and enhancements to data types, counter size, and protocol operations.
• Version 3 (SNMPv3) — This is the most recent version of SNMP, and includes significant
enhancements to administration and security. SNMPv3 is fully described in RFC 2571,
RFC 2572, RFC 2573, RFC 2574, and RFC 2575.

SNMPv1 and SNMPv2c

The components of SNMPv1 and SNMPv2c network management fall into three categories:
• Managed devices (such as a switch).
• SNMP agents and MIBs, including SNMP traps, community strings, and Remote Monitoring
(RMON) MIBs, which run on managed devices.
SNMP Configuration
Enterasys G-Series CLI Reference 5-1
5
Refer to page...
5-1
5-3
5-7
5-15
5-18
5-22
5-25
5-28
5-36