Show Time - Enterasys G3G170-24 Cli Reference Manual

Defaults
None.
Mode
Switch command, read‐only.
Examples
This example shows how to display the system's CPU utilization:
G3(ro)->show system utilization cpu
Total CPU Utilization:
Switch
-----------------------------------------------
1
This example shows how to display the system's overall memory usage:
G3(ro)->show system utilization storage
Storage Utilization:
Type
---------------------------------------------------------------
RAM
Flash
This example shows how to display information about the processes running on the system. Only
partial output is shown.
G3(ro)->show system utilization process
TID
8d45148 captureTask
8e264f8 poe_monitor
8ea6d38 poe_read
8eb7140 vlanDynEg
8f0be10 tcdpSendTask
8f1c0e8 tcdpTask

show time

Use this command to display the current time of day in the system clock.
Syntax
show time
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
CPU 5 sec
1 3%
Description
RAM device
Images, Config, Other
Name
1 min 5 min
1% 1%
Size(Kb) Available (Kb)
262144
31095
5Sec 1Min
0.00% 0.00%
0.00% 0.01%
0.80% 0.22%
0.00% 0.00%
0.00% 0.00%
0.00% 0.00%
97173
8094
5Min
0.00%
0.05%
0.20%
0.00%
0.00%
0.00%
Enterasys G-Series CLI Reference 2-15
show time