Torque Values; 1-Gigabit Ethernet And 100Base-Fx Transceiver (Sfp) Specifications; Recommended Torque Values By Screw Size; Mini-Gbic Input/Output Port Specifications - Enterasys G3G124-24 Hardware Installation Manual

Table A-4 G3K-2TX and G3K-4TX IOM Specifications (continued)
Item
Thermal Output
Environmental
Operating Temperature
Storage Temperature
Operating Relative Humidity

Torque Values

The following table describes the recommended torque values to use when installing the G‐Series
switch using standard threaded fastener machine screws and bolts.
Table A-5 Recommended Torque Values by Screw Size
English
2 – 56
4 – 40
6 – 32
8 – 32
10 – 32
1/4 – 20
1-Gigabit Ethernet and 100Base-FX Transceiver (SFP)
Specifications
The G3 SFP (Mini‐GBIC) port interface slots support 1‐Gbps fiber‐optic and copper connections as
described in Table
Table A-6 Mini-GBIC Input/Output Port Specifications
Item
MGBIC-LC01
MGBIC-MT01
MGBIC-02
MGBIC-LC03
MGBIC-LC04
Screw Size
Metric
N/A N/A
1.5
2.5
3.5
4.5
5
6.5
A‐6. These optional Mini‐GBICs are hot swappable.
Specification
1 LC fiber-optic multimode port that is compliant with the 1000BASE-SX
standard and has an LC connector.
1 MT-RJ fiber-optic multi-mode port that is compliant with the 1000BASE-SX
standard and has an MT-RJ connector.
1 RJ45 copper connection that is compliant with the 1000BASE-T standard
and has an RJ45 connector.
1 LC fiber-optic multimode port that is compliant with the 1000BASE-SX
standard and has an LC duplex style connector.
1 LC fiber-optic multimode port that is compliant with the 100BASE-FX
standard and has an LC connector.
Specification
Same as Power Consumption (above)
0°C to 50°C (32°F to 122°F)
-40°C to 70°C (-40°F to 158°F)
5% to 95% (non-condensing)
Torque in Pounds
-%5 Nominal
1.42
2.85
4.75
8.55
17.10
30.40
63.65
Enterasys G-Series Hardware Installation Guide A-5
+%5
1.5 1.57
3.0 3.15
5.0 5.25
9.0 9.45
18.0 18.90
32.0 33.60
67.0 70.35
Torque Values
Bit Size
0
0
0/1
1
2
2
3