Example
This example shows how to execute the "Jan1_2004.cfg" configuration file:
G3(su)->configure configs/Jan1_2004.cfg
copy
Use this command to upload or download an image or a CLI configuration file.
Syntax
copy source destination
Parameters
source
destination
Defaults
None.
Mode
Switch command, read‐write.
Examples
This example shows how to download an image via TFTP:
G3(su)->copy tftp://10.1.192.34/version01000 system:image
This example shows how to download a configuration file to the configs directory:
G3(su)->copy tftp://10.1.192.1/Jan1_2004.cfg configs/Jan1_2004.cfg
delete
Use this command to remove an image or a CLI configuration file from the switch.
Syntax
delete filename
Parameters
filename
Defaults
None.
Specifies location and name of the source file to copy. Options are a local file
path in the configs directory, or the URL of a TFTP server.
Specifies location and name of the destination where the file will be copied.
Options are a slot location and file name, or the URL of a TFTP server.
Specifies the local path name to the file. Valid directories are /images and
/configs.44.
Enterasys G-Series CLI Reference 2-47
copy