Enterasys G3G170-24 Cli Reference Manual page 138

show port counters
switch | mib2
Defaults
If port‐string is not specified, counter statistics will be displayed for all ports.
If mib2 or switch are not specified, all counter statistics will be displayed for the specified port(s).
Mode
Switch command, read‐only.
Examples
This example shows how to display all counter statistics, including MIB2 network traffic and
traffic through the device for
G3(su)->show port counters ge.3.1
Port: ge.3.1
No counter discontinuity time
-----------------------------------------------------------------
MIB2 Interface Counters
-----------------------
In Octets
In Unicast Pkts
In Multicast Pkts
In Broadcast Pkts
In Discards
In Errors
Out Octets
Out Unicasts Pkts
Out Multicast Pkts
Out Broadcast Pkts
Out Errors
802.1Q Switch Counters
----------------------
Frames Received
Frames Transmitted
This example shows how to display all
device.
G3(su)->show port counters ge.3.1 switch
Port: ge.3.1
802.1Q Switch Counters
-----------------------
Frames Received
Frames Transmitted
Table 4‐2 provides an explanation of the command output.
4-6 Port Configuration
(Optional) Displays switch or MIB2 statistics. Switch statistics detail
performance of the G‐Series device. MIB2 interface statistics detail
performance of all network devices.
ge .3.1:
MIB2 Interface: 1
ge
Bridge Port: 2
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
.3.1 port counter statistics related to traffic through the