Area Stub No-Summary; Area Virtual-Link - Enterasys G3G170-24 Cli Reference Manual

area stub no-summary

Usage
A stub area is characterized by the fact that AS external LSAs are not propagated into the area.
Removing AS external LSAs and summary LSAs can significantly reduce the link state database of
routers within the stub area.
Use the no form of the command to delete a stub area.
Example
This example creates a stub area with the ID of 30.
G3(su)->router(Config-router)# area 30 stub
area stub no-summary
This command disables the import of summary LSAs into the specified stub area.
Syntax
area areaid stub no-summary
no area areaid stub no-summary
Parameters
areaid
Defaults
None.
Mode
Router OSPFv3 configuration: G3(su)‐>router(Config‐router)#
Usage
Use the no form of this command to set the summary LSA import mode to the default for the
specified stub area.
Example
The example disables the import of summary LSAs into stub area 30.
G3(su)->router(Config-router)# area 30 stub no-summary

area virtual-link

This command creates the OSPFv3 virtual interface for the specified area and neighbor.
Syntax
area areaid virtual-link neighborid
no area areaid virtual-link neighborid
19-16 OSPFv3 Configuration
Specifies the area ID in IP address format (dotted‐quad) or as a decimal
value.