Example
This example returns port
processing received LLDPDUs.
G3(rw)->clear lldp port status ge.1.1
clear lldp port trap
Use this command to return the port LLDP trap setting to the default value of disabled.
Syntax
clear lldp port trap port-string
Parameters
port‐string
Defaults
None.
Mode
Switch command, read‐write.
Example
This example returns port
G3(rw)->clear lldp port trap ge.1.1
clear lldp port med-trap
Use this command to return the port LLDP‐MED trap setting to the default value of disabled.
Syntax
clear lldp port med-trap port-string
Parameters
port‐string
Defaults
None.
Mode
Switch command, read‐write.
Example
This example returns port
G3(rw)->clear lldp port med-trap ge.1.1
ge
.1.1 to the default state of enabled for both transmitting and
Specifies the port or range of ports to be affected.
ge
.1.1 to the default LLDP trap state of disabled.
Specifies the port or range of ports to be affected.
ge
.1.1 to the default LLDP‐MED trap state of disabled.
clear lldp port trap
Enterasys G-Series CLI Reference 3-29