Show Ipv6 Route Summary; Show Ipv6 Summary Output Details - Enterasys G3G170-24 Cli Reference Manual

show ipv6 route summary

show ipv6 route summary
This command displays the summary of the routing table.
Syntax
show ipv6 route summary [all]
Parameters
all
Defaults
None.
Mode
Router privileged execution: G3(su)‐>router#
Router user execution: G3(su)‐>router>
Usage
Use the command without parameters to display the count summary for only the best routes. Use
all to display the count summary for all routes, including best and non‐best routes.
Example
This example illustrates the summary information displayed by this command.
G3(su)->router>show ipv6 route summary all
IPv6 Routing Table Summary - 6 entries
Connected Routes
Static Routes
OSPF Routes
Intra Area Routes
Inter Area Routes
External Type-1 Routes
External Type-2 Routes
Total routes
Number of Prefixes:
/0: 1,
Table 18‐4 provides an explanation of the command output.
Table 18-4 show ipv6 summary Output Details
Output Field
Connected Routes
Static Routes
OSPF Routes
Number of Prefixes
Total Routes
18-26 IPv6 Configuration
(Optional) Display the count summary for all routes, including best and
non‐best routes.
/64: 5
What It Displays...
Total number of connected routes in the routing table.
Total number of static routes in the routing table.
Total number of routes installed by OSPFv3 protocol.
Summarizes the number of routes with prefixes of different lengths
Total number of routes in the routing table.
3
3
0
0
0
0
0
6