Clear Sntp Poll-Timeout; Configuring Node Aliases; Purpose; Commands - Enterasys G3G170-24 Cli Reference Manual

Mode
Switch command, read‐write.
Example
This example shows how to set the SNTP poll timeout to 10 seconds:
G3(su)->set sntp poll-timeout 10

clear sntp poll-timeout

Use this command to clear the SNTP poll timeout.
Syntax
clear sntp poll-timeout
Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to clear the SNTP poll timeout:
G3(su)->clear sntp poll-timeout

Configuring Node Aliases

Purpose

To review, disable, and re‐enable node (port) alias functionality, which determines what network
protocols are running on one or more ports.

Commands

For information about...
show nodealias config
set nodealias
clear nodealias config
clear sntp poll-timeout
Refer to page...
11-32
11-32
11-33
Enterasys G-Series CLI Reference 11-31