Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to set the message of the day banner to read: O Knights of Ni, you
are just and fair, and we will return with a shrubbery - King Arthur:
G3(rw)->set banner motd "O Knights of Ni, you are just and \n fair, and we will
return with a shrubbery \n \t -King Arthur"
clear banner motd
Use this command to clear the banner message of the day displayed at session login to a blank
string.
Syntax
clear banner motd
Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to clear the message of the day banner to a blank string:
G3(rw)->clear banner motd
show version
Use this command to display hardware and firmware information. Refer to "Downloading a
Firmware Image" on page 2‐35 for instructions on how to download a firmware image.
Syntax
show version
Parameters
None.
Defaults
None.
clear banner motd
Enterasys G-Series CLI Reference 2-21