Show System Utilization - Enterasys G3G170-24 Cli Reference Manual

show system utilization

Example
This example shows how to display the system's hardware configuration. Please note that the
information you see displayed may differ from this example.
G3(su)->show system hardware
show system utilization
Use this command to display detailed information about the processor running on the switch, or
the overall memory usage of the Flash and SDRAM storage devices on the unit, or the processes
running on the switch.
Syntax
show system utilization {cpu | storage | process}
Parameters
cpu
storage
process
2-14 Basic Configuration
SLOT 1 HARDWARE INFORMATION
---------------------------
Model:
Serial Number:
Vendor ID:
Base MAC Address:
Hardware Version:
FirmWare Version:
Boot Code Version:
SLOT 2 HARDWARE INFORMATION
---------------------------
Slot is not present.
SLOT 3 HARDWARE INFORMATION
---------------------------
Slot is not present.
SLOT 4 HARDWARE INFORMATION
---------------------------
Model:
Serial Number:
Vendor ID:
Base MAC Address:
Hardware Version:
FirmWare Version:
Boot Code Version:
POWER SUPPLY 1 HARDWARE INFORMATION
-----------------------------------
Model:
Serial Number:
Wattage:
Software Version:
Revision:
Display information about the processor running on the switch.
Display information about the overall memory usage on the switch.
Display information about the processes running on the switch.
G3G124-24
777777777777
0xbc00
00:11:88:B1:76:C0
BCM56514 REV 1
01.00.00.0052
01.00.42
G3G-24SFP
------------
0xbc00
00:11:88:B1:76:C0
BCM56512 REV 1
01.00.00.0052
01.00.42
-
400
-
-