Commands; Show Snmp Engineid; Show Snmp Engineid Output Details - Enterasys G3G170-24 Cli Reference Manual

show snmp engineid

Commands

For information about...
show snmp engineid
show snmp counters
show snmp engineid
Use this command to display the SNMP local engine ID. This is the SNMP v3 engine's
administratively unique identifier.
Syntax
show snmp engineid
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows how to display SNMP engine properties:
G3(su)->show snmp engineid
EngineId: 80:00:15:f8:03:00:e0:63:9d:b5:87
Engine Boots
Engine Time
Max Msg Size
Table 5‐2 provides an explanation of the command output.
Table 5-2 show snmp engineid Output Details
Output Field
EngineId
Engine Boots
Engine Time
Max Msg Size
5-4 SNMP Configuration
= 12
= 162181
= 2048
What It Displays...
String identifying the SNMP agent on the device.
Number of times the SNMP engine has been started or reinitialized.
Time in seconds since last reboot.
Maximum accepted length, in bytes, of SNMP frame.
Refer to page...
5-4
5-5