Set Rmon Capture - Enterasys G3G170-24 Cli Reference Manual

Example
This example shows how to display RMON capture entries and associated buffer entries:
G3(rw)->show rmon capture
Buf.control= 28062
----------------------------------------------------------
FullStatus
Captured packets
Download size
Max Octet Requested 50000
Start time
Owner
captureEntry= 1
--------------------------------------------
Pkt ID
Pkt Length
Data:
00 00 5e 00 01 01 00 01 f4 00 7d ce 08 00 45 00
00 4b b4 b9 00 00 40 11 32 5c 0a 15 43 05 86 8d
bf e5 00 a1 0e 2b 00 37 cf ca 30 2d 02 01 00 04
06 70 75 62 6c 69 63 a2 20 02 02 0c 92 02 01 00
02 01 00 30 14 30 12 06 0d 2b 06 01 02 01 10 07
01 01 0b 81 fd 1c 02 01 01 00 11 0b 00

set rmon capture

Use this command to configure an RMON capture entry.
Syntax
set rmon capture index {channel [action {lock}] [slice slice] [loadsize loadsize]
[offset offset] [asksize asksize] [owner owner]}
Parameters
index
channel
action lock
slice slice
loadsize loadsize
offset offset
asksize asksize
owner
Channel= 38283
avail FullAction
251 Capture slice
100 Download offset
Max Octet Granted
1 days 0 hours 51 minutes 15 seconds
monitor
Buff.control= 28062
9 Pkt time
93 Pkt status
Specifies a buffer control entry.
Specifies the channel to which this capture entry will be applied.
(Optional) Specifies the action of the buffer when it is full as:
• lock ‐ Packets will cease to be accepted
(Optional) Specifies the maximum octets from each packet to be saved in
a buffer. Currently, the only value allowed is 1518.
(Optional) Specifies the maximum octets from each packet to be
downloaded from the buffer. The default is 100.
(Optional) Specifies the first octet from each packet that will be retrieved.
(Optional) Specifies the requested maximum octets to be saved in this
buffer. Currently, the only value accepted is ‐1, which requests as many
octets as possible.
(Optional) Specifies the name of the entity that configured this entry.
EntryStatus= valid
lock
1518
0
50000
1 days 0 hours 51 minutes 15 seconds
0
Enterasys G-Series CLI Reference 12-21
set rmon capture