Chapter 12: Rmon Configuration; Rmon Monitoring Group Functions; Rmon Monitoring Group Functions And Commands - Enterasys G3G170-24 Cli Reference Manual

Hide thumbs Also See for G3G170-24:

Table of Contents

This chapter describes the commands used to configure RMON on a G‐Series switch.

For information about...

Statistics Group Commands

History Group Commands

Alarm Group Commands

Event Group Commands

Filter Group Commands

Packet Capture Commands

Monitoring Group Functions

RMON (Remote Network Monitoring) provides comprehensive network fault diagnosis,

planning, and performance tuning information and allows for interoperability between SNMP

management stations and monitoring agents. RMON extends the SNMP MIB capability by

defining additional MIBs that generate a much richer set of data about network usage.

"groups" each gather specific sets of data to meet common network monitoring requirements.

12‐1 lists the RMON monitoring groups supported on G‐Series devices, each group's

function and the elements it monitors, and the associated configuration commands needed.

Table 12-1 RMON Monitoring Group Functions and Commands

What It Does...

Records statistics

measured by the RMON

probe for each monitored

interface on the device.

RMON Configuration

What It Monitors...

Packets dropped, packets

sent, bytes sent (octets),

broadcast and multicast

packets, CRC errors,

oversized and undersized

packets, fragments, jabbers,

and counters for packets.

Refer to page...

CLI Command(s)

Enterasys G-Series CLI Reference 12-1