Set Snmp Access; Show Snmp Access Output Details - Enterasys G3G170-24 Cli Reference Manual

set snmp access

Mode
Switch command, read‐only.
Example
This example shows how to display SNMP access information:
G3(su)->show snmp access
Group
Security model
Security level
Read View
Write View
Notify View
Context match
Storage type
Row status
Group
Security model
Security level
Read View
Write View
Notify View
Context match
Storage type
Row status
Table 5‐6 provides an explanation of the command output.
Table 5-6 show snmp access Output Details
Output Field
Group
Security model
Security level
Read View
Write View
Notify View
Context match
Storage type
Row status
set snmp access
Use this command to set an SNMP access configuration.
5-16 SNMP Configuration
= SystemAdmin
= USM
= noAuthNoPriv
= All
=
= All
= exact match
= nonVolatile
= active
= NightOperator
= USM
= noAuthNoPriv
= All
=
= All
= exact match
= nonVolatile
= active
What It Displays...
SNMP group name.
Security model applied to this group. Valid types are: SNMPv1,
SNMPv2c, and SNMPv3 (User based - USM).
Security level applied to this group. Valid levels are:
• noAuthNoPrivacy (no authentication required)
• AuthNoPrivacy (authentication required)
• authPriv (privacy -- most secure level)
Name of the view that allows this group to view SNMP MIB objects.
Name of the view that allows this group to configure the contents of the
.
SNMP agent
Name of the view that allows this group to send an SNMP trap message.
Whether or not SNMP context match must be exact (full context name
match) or a partial match with a given prefix.
Whether access entries for this group are stored in volatile, nonvolatile
or read-only memory.
Status of this entry: active, notInService, or notReady.