Clear Snmp View - Enterasys G3G170-24 Cli Reference Manual

Parameters
viewname viewname Specifies a name for a MIB view.
subtree subtree
mask mask
included |
excluded
volatile |
nonvolatile
Defaults
If not specified, mask will be set to 255.255.255.255
If not specified, subtree use will be included.
If storage type is not specified, nonvolatile (permanent) will be applied.
Mode
Switch command, read‐write.
Example
This example shows how to set an SNMP MIB view to "public" with a subtree name of 1.3.6.1
included:
G3(su)->set snmp view viewname public subtree 1.3.6.1 included

clear snmp view

Use this command to delete an SNMPv3 MIB view.
Syntax
clear snmp view viewname subtree
Parameters
viewname
subtree
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to delete SNMP MIB view "public":
G3(su)->clear snmp view public 1.3.6.1
Specifies a MIB subtree name.
(Optional) Specifies a bitmask for a subtree.
(Optional) Specifies subtree use (default) or no subtree use.
(Optional) Specifies the use of temporary or permanent (default) storage.
Specifies the MIB view name to be deleted.
Specifies the subtree name of the MIB view to be deleted.
clear snmp view
Enterasys G-Series CLI Reference 5-21