Ospfv3 Show Commands; Purpose; Commands; Show Ipv6 Ospf - Enterasys G3G170-24 Cli Reference Manual

Usage
The transmit delay, specified in seconds, sets the estimated number of seconds it takes to transmit
a link state update packet over this interface.
Use the no form of this command to return the transmit delay to the default value of 1 seconds.
Example
This example sets the transmit delay value to 4 seconds for router interface VLAN 7.
G3(su)->router(Config)# interface vlan 7
G3(su)->router(Config-if(Vlan 7))# ipv6 ospf transmit-delay 4

OSPFv3 Show Commands

Purpose

These commands are used to display OSPFv3 information and statistics.

Commands

For information about...

show ipv6 ospf

show ipv6 ospf area
show ipv6 ospf abr
show ipv6 ospf asbr
show ipv6 ospf database
show ipv6 ospf interface
show ipv6 ospf interface stats
show ipv6 ospf neighbor
show ipv6 ospf range
show ipv6 ospf stub table
show ipv6 ospf virtual-link
show ipv6 ospf
This command displays OSPFv3 router information.
Syntax
show ipv6 ospf
Parameters
None.
OSPFv3 Show Commands
Refer to page...
19-27
19-29
19-30
19-31
19-32
19-36
19-38
19-40
19-42
19-43
19-44
Enterasys G-Series CLI Reference 19-27