Show Igmpsnooping Mfdb - Enterasys G3G170-24 Cli Reference Manual

show igmpsnooping mfdb

group group
Defaults
If no group is specified, information for all groups is displayed.
Mode
Switch command, read‐only.
Example
This example displays the static IGMP ports for VLAN 20.
G3(su)->show igmpsnooping static 20
--------------------------------------------------------------------------------
Vlan Id
IGMP Port List = ge.1.1
show igmpsnooping mfdb
Use this command to display multicast forwarding database (MFDB) information.
Syntax
show igmpsnooping mfdb [stats]
Parameters
stats
Defaults
If stats is not specified, all MFDB table entries will be displayed.
Mode
Switch command, read‐only.
Examples
This example shows how to display multicast forwarding database entries:
G3(su)->show igmpsnooping mfdb
MAC Address
-----------------------
00:14:01:00:5E:02:CD:B0
00:32:01:00:5E:37:96:D0
00:32:01:00:5E:7F:FF:FA
This example shows how to display multicast forwarding database statistics:
G3(su)->show igmpsnooping mfdb stats
Max MFDB Table Entries......................... 256
Most MFDB Entries Since Last Reset............. 1
Current Entries................................ 0
10-8 IGMP Configuration
(Optional) Specifies the IGMP group for which to display static IGMP
ports.
= 20 Static Multicast Group Address = 233.11.22.33
(Optional) Displays MFDB statistics.
Type Description
-------
Dynamic
Dynamic
Dynamic
---------------- -------------------------
Network Assist Fwd: ge.1.1,ge.3.1,ge.4.1
Network Assist Fwd: ge.4.7
Network Assist Fwd: ge.4.7
Type = IGMP
Interfaces