Configuring Multiple Authentication Methods; About Multiple Authentication Types; Commands - Enterasys G3G170-24 Cli Reference Manual

Configuring Multiple Authentication Methods

Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
Example
This example resets the MAC authentication significant bits to 48.
G3(su)->clear macauthentication significant-bits
Configuring Multiple Authentication Methods

About Multiple Authentication Types

When enabled, multiple authentication types allow users to authenticate using more than one
method on the same port. In order for multiple authentication to function on the device, each
possible method of authentication (MAC authentication, 802.1X, PWA) must be enabled globally
and configured appropriately on the desired ports with its corresponding command set described
in this chapter.
Multiple authentication mode must be globally enabled on the device using the set multiauth
mode command.

Commands

For information about...
show multiauth
set multiauth mode
clear multiauth mode
set multiauth precedence
clear multiauth precedence
show multiauth port
set multiauth port
clear multiauth port
show multiauth station
show multiauth session
show multiauth idle-timeout
20-30 Security Configuration
Note: G3 devices support up to eight authenticated users per port.
Refer to page...
20-31
20-31
20-32
20-32
20-33
20-34
20-34
20-35
20-36
20-36
20-37