Show Spantree Adminedge; Set Spantree Adminedge - Enterasys G3G170-24 Cli Reference Manual

Defaults
If sid is not specified, admin path cost will be reset for Spanning Tree 0.
Mode
Switch command, read‐write.
Example
This example shows how to reset the admin path cost to 0 for
G3(su)->clear spantree adminpathcost ge.3.2 sid 1

show spantree adminedge

Use this command to display the edge port administrative status for a port.
Syntax
show spantree adminedge [port port-string]
Parameters
port‐string
Defaults
If port‐string is not specified edge port administrative status will be displayed for all Spanning
Tree ports.
Mode
Switch command, read‐only.
Example
This example shows how to display the edge port status for
G3(su)->show spantree adminedge port ge.3.2
Port ge.3.2 has a Port Admin Edge of Edge-Port

set spantree adminedge

Use this command to set the edge port administrative status on a Spanning Tree port.
Syntax
set spantree adminedge port-string {true | false}
Parameters
port‐string
true | false
(Optional) Displays edge port administrative status for specific
port(s). For a detailed description of possible port‐string values,
refer to "Port String Syntax Used in the CLI" on page 4‐1.
Specifies the edge port. For a detailed description of possible port‐string
values, refer to "Port String Syntax Used in the CLI" on page 4‐1.
Enables (true) or disables (false) the specified port as a Spanning Tree edge
port.
show spantree adminedge
ge .3.2 on SID 1:
ge .3.2:
Enterasys G-Series CLI Reference 6-37