Resetting the Switch
Resetting the Switch
Purpose
To reset one or more switches, and to clear the user‐defined configuration parameters.
Commands
For information about...
reset
clear config
reset
Use this command to reset the switch without losing any user‐defined configuration settings.
Syntax
reset
Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
Examples
This example shows how to reset the system:
G3(su)->reset
This command will reset all modules and may disconnect your telnet session.
Do you want to continue (y/n) [n]?
clear config
Use this command to clear the user‐defined configuration parameters.
Syntax
clear config
Parameters
None.
2-52 Basic Configuration
Refer to page...
2-52
2-52