Show Port Advertise; Set Port Advertise - Enterasys G3G170-24 Cli Reference Manual

show port advertise

show port advertise
Use this command to display port capability and advertisement as far as speed and duplex for
auto‐negotiation.
Syntax
show port advertise [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, advertisement for all ports will be displayed.
Mode
Switch command, read‐only.
Example
This example shows how to display advertisement status for Gigabit ports 13 and 14:
G3(su)->show port advertise ge.1.13-14
ge.1.13
-------------------------------------------------
10BASE-T
10BASE-TFD
100BASE-TX
100BASE-TXFD
1000BASE-T
1000BASE-TFD
pause
ge.1.14
-------------------------------------------------
10BASE-T
10BASE-TFD
100BASE-TX
100BASE-TXFD
1000BASE-T
1000BASE-TFD
pause

set port advertise

Use this command to configure what a port will advertise for speed/duplex capabilities in auto‐
negotiation.
Syntax
set port advertise {port-string}{10t | 10tfd | 100tx | 100txfd | 1000t | 1000tfd
| pause}
4-16 Port Configuration
(Optional) Displays advertised ability for specific port(s). For a
detailed description of possible port‐string values, refer to "Port String
Syntax Used in the CLI" on page 4‐1.
capability advertised
yes yes
yes yes
yes yes
yes yes
no no
yes yes
yes yes
capability advertised
yes yes
yes yes
yes yes
yes yes
no no
yes yes
yes yes
remote
yes
yes
yes
yes
no
yes
no
remote
yes
yes
yes
yes
no
yes
no