Clear Multiauth Port - Enterasys G3G170-24 Cli Reference Manual

Hide thumbs Also See for G3G170-24:

Table of Contents

Switch command, read‐write.

This example shows how to set the port multiple authentication mode to required on

G3(rw)->set multiauth port mode auth-reqd ge.3.14

This example shows how to set the number of users allowed to authenticate on port

G3(rw)->set multiauth port numusers 8 ge.3.14

clear multiauth port

Use this command to clear multiple authentication properties for one or more ports.

clear multiauth port {mode | numusers} port-string

Switch command, read‐write.

This example shows how to clear the port multiple authentication mode on port

G3(rw)->clear multiauth port mode ge.3.14

This example shows how to clear the number of users on port

G3(rw)->clear multiauth port numusers ge.3.14

Specifies the port(s) on which to set multiple authentication properties.

Clears the specified port's multiple authentication mode.

Clears the value set for the number of users allowed authentication on the

specified port.

Specifies the port or ports on which to clear multiple authentication

clear multiauth port

Enterasys G-Series CLI Reference 20-35