Set Console Baud; Activating Licensed Features; License Key Field Descriptions - Enterasys G3G170-24 Cli Reference Manual

set console baud

Use this command to set the console port baud rate.
Syntax
set console baud rate
Parameters
rate
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to set the console port baud rate to 19200:
G3(su)->set console baud 19200

Activating Licensed Features

In order to enable the G3 advanced features, such as Advanced Routing, you must purchase and
activate a license key. If you have purchased a license, you can proceed to activate your license as
described in this section. If you wish to obtain a permanent or evaluation license, use the
Enterasys Customer Portal or contact the Enterasys Networks Sales Department.

License Key Field Descriptions

When Enterasys supplies a license, it will be sent to you as a character string similar to the
following:
INCREMENT g3advrouter 2006.0127 27-jan-2011 0123456789AB 0123456789AB
The contents of the six fields, from the left, indicate:
• Type—the type of license. For the G‐Series, the value in this field is always "INCREMENT."
• Feature—description of the feature being licensed. For example, "g3advrouter"as shown in
the character string above.
• Date‐based version (DBV)—a date‐related string. For the G‐Series, the value in this field is not
significant.
• Expiration type—indicates whether the license is a permanent or an evaluation license. If the
license is an evaluation license, this field will contain the expiration date of the license. If the
license is a permanent license, this field will contain the word "permanent."
• Key—the license key.
• Host ID—the serial number of the switch to which this license applies.
Sets the console baud rate. Valid values are: 300, 600, 1200, 2400, 4800, 5760,
9600, 14400, 19200, 38400, and 115200.
set console baud
Enterasys G-Series CLI Reference 2-27