show gvrp
settings (enable or disable) and timer settings. By default, GVRP is enabled globally on the device,
but disabled on all ports.
Commands
For information about...
show gvrp
show garp timer
set gvrp
clear gvrp
set garp timer
show gvrp
Use this command to display GVRP configuration information.
Syntax
show gvrp [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, GVRP configuration information will be displayed for all ports and
the device.
Mode
Switch command, read‐only.
Example
This example shows how to display GVRP status for the device and for fw.2.1:
G3(su)->show gvrp ge.2.1
Global GVRP status is enabled.
Port Number
-----------
ge.2.1
show garp timer
Use this command to display GARP timer values for one or more ports.
Syntax
show garp timer [port-string]
7-20 802.1Q VLAN Configuration
(Optional) Displays GVRP configuration information for specific port(s). For
a detailed description of possible port‐string values, refer to "Port String
Syntax Used in the CLI" on page 4‐1.
GVRP status
-----------
disabled
Refer to page...
7-20
7-20
7-22
7-22
7-23