Show Ip Ospf Database - Enterasys G3G170-24 Cli Reference Manual

Mode
Router configuration: G3(su)‐>router(Config‐router)#
Example
This example shows how to redistribute RIP routing information to non‐subnetted routes in OSPF
routes:
G3(su)->router(Config)#router ospf
G3(su)->router(Config-router)#redistribute rip
show ip ospf
Use this command to display OSPF information.
Syntax
show ip ospf
Parameters
None.
Defaults
None.
Mode
Any router mode.
Example
This example shows how to display OSPF information:
G3(su)->router#show ip ospf
Routing process "ospf 1" with ID 155.155.155.155
Supports only Normal TOS route.
It is not an area border router and is an autonomous system boundary router.
Redistributing External Routes from static
Number of areas in this router is 2
Area 0.0.0.0
SPF algorithm executed 0 times
Area ranges are
Link State Age Interval is 10
Area 0.0.0.8
SPF algorithm executed 302 times
Area ranges are
Link State Age Interval is 10

show ip ospf database

Use this command to display the OSPF link state database.
Syntax
show ip ospf database
Enterasys G-Series CLI Reference 16-25
show ip ospf