This example shows how to remove a rule from policy profile 5 that will forward UDP frames
from source port 45:
G3(su)->clear policy rule 5 udpportsource 45 forward
clear policy all-rules
Use this command to remove all policy classification rules.
Syntax
clear policy all-rules
Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to remove all administrative and policy index rules:
G3(su)->clear policy all-rules
Assigning Ports to Policy Profiles
Purpose
To assign and unassign ports to policy profiles.
Commands
For information about...
set policy port
clear policy port
set policy port
Use this command to assign ports to a policy profile.
Syntax
set policy port port-string profile-index
clear policy all-rules
Refer to page...
8-13
8-14
Enterasys G-Series CLI Reference 8-13