Clear Mac Algorithm; Set Mac Multicast - Enterasys G3G170-24 Cli Reference Manual

clear mac algorithm

Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows the output of this command.
G3(su)->show mac algorithm
Mac hashing algorithm is mac-crc16-upperbits.
clear mac algorithm
Use this command to return the MAC hashing algorithm to the default value of mac‐crc16‐
upperbits.
Syntax
clear mac algorithm
Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
Example
This example resets the MAC hashing algorithm to the default value.
G3(su)->clear mac algorithm

set mac multicast

Use this command to define on what ports within a VLAN a multicast address can be dynamically
learned on, or on what ports a frame with the specified MAC address can be flooded. Also, use
this command to append ports to or clear ports from the egress ports list.
Syntax
set mac multicast mac-address vlan-id [port-string] [{append | clear} port-string]
Parameters
mac‐address
vlan‐id
11-22 Logging and Network Management
Specifies the multicast MAC address. The MAC address can be
formatted as xx:xx:xx:xx:xx:xx or xx‐xx‐xx‐xx‐xx‐xx.
Specifies the VLAN ID containing the ports.