Ip Pimsm - Enterasys G3G170-24 Cli Reference Manual

ip pimsm

Commands
For information about...
Global configuration commands
ip pimsm
ip pimsm staticrp
Interface configuration commands
ip pimsm enable
ip pimsm query-interval
Display commands
show ip pimsm
show ip pimsm componenttable
show ip pimsm interface
show ip pimsm neighbor
show ip pimsm rp
show ip pimsm rphash
show ip pimsm staticrp
ip pimsm
This command sets administrative mode of PIM‐SM multicast routing across the router to
enabled. IGMP must be enabled before PIM‐SM can be enabled. By default, both IGMP and PIM
are globally disabled. The no form of this command disables PIM.
Syntax
ip pimsm
no ip pimsm
Parameters
None.
Defaults
None.
Mode
Global router configuration: G3(su)‐>router(Config)#
Example
This example shows how to globally enable and disable PIM:
G3(su)->router(Config)# ip pimsm
G3(su)->router(Config)# no ip pimsm
16-46 IPv4 Routing Protocol Configuration
Refer to page...
16-46
16-47
16-47
16-48
16-48
16-49
16-50
16-52
16-52
16-54
16-54