Commands; Show Policy Profile - Enterasys G3G170-24 Cli Reference Manual

show policy profile

Commands

For information about...
show policy profile
set policy profile
clear policy profile
show policy profile
Use this command to display policy profile information.
Syntax
show policy profile {all | profile-index [consecutive-pids] [-verbose]}
Parameters
all | profile‐index
consecutive‐pids
‐verbose
Defaults
If optional parameters are not specified, summary information will be displayed for the specified
index or all indices.
Mode
Switch command, read‐only.
8-2 Policy Classification Configuration
Displays policy information for all profile indexes or a specific profile index.
(Optional) Displays information for specified consecutive profile indexes.
(Optional) Displays detailed information.
Refer to page...
8-2
8-4
8-5