Show Lldp Port Local-Info Output Details - Enterasys G3G170-24 Cli Reference Manual

Table 3-4 show lldp port local-info Output Details
Output Field
Local Port
Local Port Id
Port Desc
Mgmt Addr
Chassis ID
Sys Name
Sys Desc
Sys Cap Supported/Enabled
Auto-Neg Supported/Enabled
Auto-Neg Advertised
Operational Speed/Duplex/
Type
Max Frame Size (bytes)
Vlan Id
LAG Supported/Enabled/Id
Protocol Id
ECS ELIN
PoE Device
PoE Power Source
PoE MDI Supported/Enabled
What it Displays...
Identifies the port for which local system information is displayed.
Mandatory basic LLDP TLV that identifies the port transmitting the
LLDPDU. Value is ifName object defined in RFC 2863.
Optional basic LLDP TLV. Value is ifDescr object defined in RFC 2863.
Optional basic LLDP TLV. IPv4 address of host interface.
Mandatory basic LLDP TLV that identifies the chassis transmitting the
LLDPDU. Value is MAC address of chassis.
Optional basic LLDP TLV. Value is the administratively assigned name for
the system.
Optional basic LLDP TLV. Value is sysDescr object defined in RFC 3418.
Optional basic LLDP TLV. System capabilities, value can be bridge and/or
router.
IEEE 802.3 Extensions MAC-PHY Configuration/Status TLV. Auto-
negotiation supported and enabled settings should be the same on the
two systems attached to the same link.
IEEE 802.3 Extensions MAC-PHY Configuration/Status TLV. Lists the
configured advertised values on the port.
IEEE 802.3 Extensions MAC-PHY Configuration/Status TLV. Lists the
operational MAU type, duplex, and speed of the port. If the received TLV
indicates that auto-negotiation is supported but not enabled, these values
will be used by the port.
IEEE 802.3 Extensions Maximum Frame Size TLV. Value indicates
maximum frame size capability of the device's MAC and PHY. In normal
mode, max frame size is 1522 bytes. In jumbo mode, max frame size is
10239 bytes.
IEEE 802.1 Extensions Port VLAN ID TLV. Value is port VLAN ID (pvid).
IEEE 802.3 Extensions Link Aggregation TLV. Values indicate whether
the link associated with this port can be aggregated, whether it is currently
aggregated, and if aggregated, the aggregated port identifier.
IEEE 802.1 Extensions Protocol Identity TLV. Values can include
Spanning tree, LACP, and GARP protocols and versions. Only those
protocols enabled on the port are displayed.
LLDP-MED Extensions Location Identification TLV. Emergency Call
Services (ECS) Emergency Location Identification Number (ELIN) is
currently the only type supported. Value is the ELIN configured on this
port.
LLDP-MED Extensions Extended Power via MDI TLV. Displayed only
when a port has PoE capabilities. Value is the Power Type of the device.
On a switch port, the value is Power Sourcing Entity (PSE).
LLDP-MED Extensions Extended Power via MDI TLV. Displayed only
when a port has PoE capabilities. Value can be primary or backup,
indicating whether the PSE is using its primary or backup power source.
IEEE 802.3 Extensions Power via MDI TLV. Displayed only when a port
has PoE capabilities. Indicates whether sending the Power via MDI TLV is
supported/enabled. Value can be yes or no.
show lldp port local-info
Enterasys G-Series CLI Reference 3-19