Show Ipv6 Ospf Neighbor - Enterasys G3G170-24 Cli Reference Manual

G-series
Hide thumbs Also See for G3G170-24:
Table of Contents

Advertisement

show ipv6 ospf neighbor

Table 19-8 show ipv6 ospf interface stats Output Details
Output Field
External LSA Count
LSAs Received
Originate New LSAs
Sent Packets
Received Packets
Discards
Bad Version
Virtual Link Not Found
Area Mismatch
Invalid Destination Address
No Neighbor at Source Address
Invalid OSPF Packet Type
Packet Type / Sent / Received
show ipv6 ospf neighbor
This command displays information about OSPFv3 neighbors.
Syntax
show ipv6 ospf neighbor [interface {vlan vlanid | tunnel tunnelid}] [neighborid]
Parameters
interface 
vlan vlanid
tunnel tunnelid
neighborid
Defaults
When no parameters are specified, information about all neighbors is displayed.
Mode
Router privileged execution: G3(su)‐>router#
Usage
If you do not specify a neighbor router ID, the output displays summary information in a table. If 
you specify an interface or tunnel, only the information for that interface or tunnel displays. 
When you specify a neighbor by router ID, detailed information about the neighbor displays. 
19-40 OSPFv3 Configuration
What It Displays...
Total number of AS External link-state advertisements in this
area's link-state database.
Number of link-state advertisements received.
Number of LSAs originated.
The number of OSPFv3 packets sent on the interface.
The number of OSPFv3 packets received on the interface.
Number of packets discarded.
Number of bad version packets received.
Number of virtual link not found packets received.
Number of area mismatch packets received.
Number of invalid destination address packets received.
Number of no neighbor at source address packets received.
Number of packets received with invalid packet type.
Columns listing packet types and number of packets sent and
received per type.
(Optional) Restricts the output display to a specific interface.
Specify the VLAN interface to display information about.
Specify the tunnel interface to display 
(Optional) Specify the neighbor by its router ID, specified in 32‐bit 
dotted quad format.

Advertisement

Table of Contents
loading

Table of Contents