Clear Rmon Channel; Show Rmon Filter - Enterasys G3G170-24 Cli Reference Manual

description
description
owner owner
Defaults
If an action is not specified, packets will be accepted on filter matches.
If not specified, control will be set to off.
If a description is not specified, none will be applied.
If owner is not specified, it will be set to monitor.
Mode
Switch command, read‐write.
Example
This example shows how to create an RMON channel entry:
G3(rw)->set rmon channel 54313 ge.2.12 accept failed control on description
"capture all"

clear rmon channel

Use this command to clear an RMON channel entry.
Syntax
clear rmon channel index
Parameters
index
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to clear RMON channel entry 2:
G3(rw)->clear rmon channel 2

show rmon filter

Use this command to display one or more RMON filter entries.
Syntax
show rmon filter [index index | channel channel]
(Optional) Specifies a description for this channel.
(Optional) Specifies the name of the entity that configured this entry.
Specifies the channel entry to be cleared.
clear rmon channel
Enterasys G-Series CLI Reference 12-17