Clear Snmp Notifyfilter; Show Snmp Notifyprofile - Enterasys G3G170-24 Cli Reference Manual

clear snmp notifyfilter

Defaults
If not specified, mask is not set.
If not specified, subtree will be included.
If storage type is not specified, nonvolatile (permanent) will be applied.
Mode
Switch command, read‐write.
Usage
See "About SNMP Notify Filters" on page 5‐28 for more information about notify filters.
Example
This example shows how to create an SNMP notify filter called "pilot1" with a MIB subtree ID of
1.3.6:
G3(su)->set snmp notifyfilter pilot1 subtree 1.3.6
clear snmp notifyfilter
Use this command to delete an SNMP notify filter configuration.
Syntax
clear snmp notifyfilter profile subtree oid-or-mibobject
Parameters
profile
subtree oid‐or‐
mibobject
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to delete the SNMP notify filter "pilot1":
G3(su)->clear snmp notifyfilter pilot1 subtree 1.3.6

show snmp notifyprofile

Use this command to display SNMP notify profile information. This associates target parameters
to an SNMP notify filter to determine who should not receive SNMP notifications.
5-34 SNMP Configuration
Specifies an SNMP filter notify name to delete.
Specifies a MIB subtree ID containing the filter to be deleted.