History; Monitoring Network Events And Status; Purpose - Enterasys G3G170-24 Cli Reference Manual

Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows a portion of the information displayed with the show logging buffer
command:
G3(su)->show logging buffer
<165>Sep
<165>Sep
(telnet)

Monitoring Network Events and Status

Purpose

To display switch events and command history, to set the size of the history buffer, and to display
and disconnect current user sessions.
Commands
For information about...

history

show history
set history
ping
show users
disconnect
history
Use this command to display the contents of the command history buffer. The command history
buffer includes all the switch commands entered up to a maximum of 100, as specified in the set
history command ("set history" on page 11‐12).
Syntax
history
Parameters
None.
Defaults
None.
4 07:43:09 10.42.71.13 CLI[5]User:rw logged in from 10.2.1.122 (telnet)
4 07:43:24 10.42.71.13 CLI[5]User: debug failed login from 10.4.1.100
Monitoring Network Events and Status
Refer to page...
11-11
11-12
11-12
11-13
11-13
11-14
Enterasys G-Series CLI Reference 11-11