Router Vrrp - Enterasys G3G170-24 Cli Reference Manual

Commands
For information about...

router vrrp

create
address
priority
advertise-interval
preempt
enable
ip vrrp authentication-key
show ip vrrp
router vrrp
Use this command to enable or disable VRRP configuration mode. The no form of this command
removes all VRRP configurations from the running configuration.
Syntax
router vrrp
no router vrrp
Parameters
None.
Defaults
None.
Mode
Global configuration: G3(su)‐>router(Config)#
Usage
You must execute the router vrrp command to enable the protocol before completing other
VRRP‐specific configuration tasks. For details on enabling configuration modes, refer to
Table 14‐2 in "Enabling Router Configuration Modes" on page 14‐2.
Example
This example shows how enable VRRP configuration mode:
G3(su)->router#configure
G3(su)->router(Config)#router vrrp
G3(su)->router(Config-router)#
Refer to page...
16-39
16-40
16-40
16-41
16-42
16-43
16-43
16-44
16-45
Enterasys G-Series CLI Reference 16-39
router vrrp