Show History; Set History - Enterasys G3G170-24 Cli Reference Manual

show history

Mode
Switch command, read‐only.
Example
This example shows how to display the contents of the command history buffer. It shows there are
five commands in the buffer:
G3(su)->history
1 hist
2 show gvrp
3 show vlan
4 show igmp
5 show ip address
show history
Use this command to display the size (in lines) of the history buffer.
Syntax
show history
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows how to display the size of the history buffer:
G3(su)->show history
History buffer size: 20

set history

Use this command to set the size of the history buffer.
Syntax
set history size [default]
Parameters
size
default
Defaults
None.
11-12 Logging and Network Management
Specifies the size of the history buffer in lines. Valid values are 1 to 100.
(Optional) Makes this setting persistent for all future sessions.