Clear Ipv6 Statistics - Enterasys G3G170-24 Cli Reference Manual

clear ipv6 statistics

Table 18-5 show ipv6 traffic Output Details (Continued)
Output Field
ICMPv6 Group Membership Reduction
Messages Transmitted
ICMPv6 Duplicate Address Detects
clear ipv6 statistics
This command clears IPv6 statistics for all interfaces or a specific interface.
Syntax
clear ipv6 statistics [interface]
Parameters
interface
Defaults
If no interface is specified, statistics are cleared (reset to 0) for all interfaces.
Mode
Router privileged executionG3(su)‐>router#
Usage
IPv6 statistics are displayed with the show ipv6 traffic command. If no interface is specified, the
counters for all IPv6 traffic statistics are reset to zero when this command is executed.
Example
This example clears the statistics for VLAN 6.
G3(su)->router# clear ipv6 statistics vlan 6
18-32 IPv6 Configuration
What It Displays...
Number of ICMPv6 Group Membership Reduction messages
sent.
Number of duplicate addresses detected by the interface
(Optional) Specifies the interface for statistics should be cleared.
Interface can be of the form:
vlan vlan‐id
tunnel tunnel‐id
loopback loop‐id