Show Snmp Community; Set Snmp Community - Enterasys G3G170-24 Cli Reference Manual

Example
This example shows how to clear all settings assigned to the "public" user within the SNMP group
"anyone":
G3(su)->clear snmp group anyone public

show snmp community

Use this command to display SNMP community names and status. In SNMPv1 and v2,
community names act as passwords to remote management.
Syntax
show snmp community [name]
Parameters
name
Defaults
If name is not specified, information will be displayed for all SNMP communities.
Mode
Switch command, read‐only.
Example
This example shows how to display information about the SNMP "public" community name. For
a description of this output, refer to set snmp community (page 5‐13).
G3(su)->show snmp community public
--- Configured community strings ---
Name
Security name
Context
Transport tag
Storage type
Status

set snmp community

Use this command to configure an SNMP community group.
Syntax
set snmp community community [securityname securityname] [context context]
[transport transport] [volatile | nonvolatile]
Parameters
community
securityname
securityname
(Optional) Displays SNMP information for a specific community name.
= *********
= public
=
=
= nonVolatile
= active
Specifies a community group name.
(Optional) Specifies an SNMP security name to associate with this
community.
show snmp community
Enterasys G-Series CLI Reference 5-13