Link-Aggregation Group Mode - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide — Link Aggregation
View
System view
Parameter
agg-id: Aggregation group ID, in the range of 1 to 384.
agg-name: Aggregation group name, a string of 1 to 32 characters.
Description
Use the link-aggregation group description command to set a description for an
aggregation group.
Use the undo link-aggregation group description command to remove the
description of the aggregation group.
Example
# Set the description "office" for aggregation group 22.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] link-aggregation group 22 description office

1.1.11 link-aggregation group mode

Syntax
link-aggregation group agg-id mode { manual | static }
undo link-aggregation group agg-id
View
System view
Parameter
agg-id: Aggregation group ID, in the range of 1 to 384.
manual: Creates a manual aggregation group.
static: Creates a static aggregation group.
Description
Use the link-aggregation group mode command to create a manual or static
aggregation group.
Use the undo link-aggregation group command to remove an aggregation group.
Example
# Create manual aggregation group 22
Chapter 1 Link Aggregation Configuration Commands
1-10