Table of Contents
Advertisement
Before You Start
Updating Your
System Software
Filter MIB
FTP packet filter program transfers via SNMP
Disconnecting an active telnet or rlogin session
STP linkState changes
CoreBuilder 6000 12-slot Chassis
For more information about this release, see
on page 14.
Before you install your new software, read all of these release notes.
Carefully read
"System Issues"
page 26.
The top-level menus in your Administration Console may vary from those
illustrated in these release notes depending on your level of access privilege
and on the modules you have installed in your CoreBuilder chassis.
You can install a new software version from any host that is running FTP
server software. The system software is distributed for both the UNIX and
the MS-DOS platforms.
The following media types are used to distribute compressed files for
software releases:
1
UNIX tar format 3
/
1
MS-DOS format 3
/
To install or upgrade your system software, you must:
1 Copy the software from the diskette to your UNIX or MS-DOS computer's
hard disk.
2 Decompress the software.
3 Load the system software from your computer's hard disk to flash memory
on the LMM+.
Details for these procedures are provided in the next sections.
Updating Your System Software
on page 23 and
-inch, double-sided, high-density 1.44 MB diskettes
2
-inch, double-sided, high-density 1.44 MB diskettes
2
"What's New at Revision 8.2.0?"
"Known Problems"
on
3
Advertisement
Table of Contents
