Display Rsa Peer-Public-Key - 3Com Switch 4500 Family Manual

9AA6651C 6066EF76 242DEAD1 DEFEA162 61677BD4
1A7BFAE7 668EDAA9 FB048C37 A0F1354D 5798C202
2253F4F5
0203
010001

display rsa peer-public-key

Syntax
display rsa peer-public-key [ brief | name keyname ]
View
Any view
Parameters
brief: Displays brief information about the public keys of all SSH peers.
keyname: Specifies a key by its name, which is a string of 1 to 64 characters.
Description
Use the display rsa peer-public-key command to display information about the locally saved public
keys of all SSH peers. If no key name is specified, the command displays detailed information about the
locally saved public keys of all SSH peers.
The display rsa peer-public-key command on the SSH server displays the locally saved public keys
of the SSH clients while the command on the SSH client displays the locally saved key of the SSH
servers.
Sometimes the public key modulus displayed with the display rsa peer-public-key command is one bit
smaller than the actual modulus. This is because the actually generated key pair is one bit smaller than
specified. For example, when you specify a 1024-bit key pair, the actually generated key pair may have
1024 or 1023 bits.
Examples
# Display brief information about all peer public keys.
<Sysname> display rsa peer-public-key brief
Type Module
---------------------------
RSA 1023
RSA 1024
# Display the information about public key "abcd".
<Sysname> display rsa peer-public-key name abcd
Name
2
a
1-4