Display Rsa Peer-Public-Key - 3Com 5500-EI PWR Reference Manual

D0FC303F 51072D6C B5D0054D 3673EBA0 A4748984
5EBF6EBE CF6A13B1 C7858241 A2A9AA79
0203
010001
After you complete the RSA key pair generation task:
If the switch is working in SSH1-compatible mode, there should be two public keys generated (that
is, the host public key and the server public key), and the display rsa local-key-pair public
command should display those two public keys.
If the switch is working in SSH2 mode, there should be only one public key generated (that is, the
host public key), and the command should display the public key.

display rsa peer-public-key

Syntax
display rsa peer-public-key [ brief | name keyname ]
View
Any view
Parameters
brief: Displays brief information about the public keys of all SSH peers.
keyname: Specifies a key by its name, which is a string of 1 to 64 characters.
Description
Use the display rsa peer-public-key command to display information about the locally saved public
keys of all SSH peers. If no key name is specified, the command displays detailed information about the
locally saved public keys of all SSH peers.
The display rsa peer-public-key command on the SSH server displays the locally saved public keys
of the SSH clients while the command on the SSH client displays the locally saved key of the SSH
servers.
Sometimes the public key modulus displayed with the display rsa peer-public-key command is one bit
smaller than the actual modulus. This is because the actually generated key pair is one bit smaller than
specified. For example, when you specify a 1024-bit key pair, the actually generated key pair may have
1024 or 1023 bits.
1-5