Ntp-Service Max-Dynamic-Sessions - 3Com 8807 Command Reference Manual

NTP Configuration Commands 935
View
VLAN interface view
Parameter
authentication-keyid: Specifies the authentication key.
keyid: Key ID used in broadcast, ranging from 0 to 4294967295.
version: Defines NTP version number.
number: NTP version number, ranging from 1 to 3.
Description
Use the ntp-service broadcast-server command to configure NTP broadcast
server mode.
Use the undo ntp-service broadcast-server command to disable the NTP
broadcast server mode.
By default, the broadcast service is disabled and number defaults to 3.
Designate an interface on the local equipment to broadcast NTP packets. The local
equipment runs in broadcast-server mode and regularly broadcasts packets to its
clients.
Example
# Configure to broadcast NTP packets through Vlan-Interface1, encrypt them with
Key 4, and set the NTP version number as 3.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] interface vlan-interface1
[3Com-Vlan-interface1] ntp-service broadcast-server authentication-
key 4 version 3
ntp-service Syntax
max-dynamic-sessions
ntp-service max-dynamic-sessions number
undo ntp-service max-dynamic-sessions
View
System view
Parameter
number: Maximum number of SESSIONS that can be created locally, ranging from
0 to 100.
Description
Use the ntp-service max-dynamic-sessions command to set how many
SESSIONS can be created locally.
Use the undo ntp-service max-dynamic-sessions command to resume the
default maximum SESSIONS number