Remote-Ping Commands; Count; Frequency - 3Com Switch 4500 Family Manual

1

remote-ping Commands

remote-ping Commands

count

Syntax
count times
undo count
View
remote-ping test group view
Parameter
times: Number of the test packets to be sent in each test. It is in the range 1 to 15 and defaults to 1.
Description
Use the count command to configure the number of packets to be sent in each test.
Use the undo count command to restore the default.
If this parameter is set to a number greater than 1, the system sends the second test packet once it
receives a response to the first one, or when the test timer times out if it receives no response after
sending the first one, and so forth until the last test packet is sent out.
Related command: frequency.
Example
# Set the "administrator-icmp" test group to send 10 packets in each test.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] remote-ping administrator icmp
[Sysname-remote-ping-administrator-icmp] count 10
destination-ip
Syntax
destination-ip ip-address
undo destination-ip
1-1