Snmp-Agent Trap Enable - 3Com 5500G Configuration And Command Reference Manual

snmp-agent trap enable

Syntax
View
Parameters
Description
Table 4 Description of the display acfp server-info command fields
Field
Server-Info
Max Life-Time
PersistentRules
ContextType
snmp-agent trap enable acfp [ client | policy | rule | server ]
undo snmp-agent trap enable acfp [ client | policy | rule | server ]
System view
acfp: Enables the switch to send ACFP traps.
client: Enables the switch to send ACPF client traps.
■
policy: Enables the switch to send ACFP policy traps.
■
rule: Enables the switch to send ACFP policy rules traps.
■
server: Enables the switch to send ACFP server traps.
■
Use the snmp-agent trap enable acfp command to enable the switch
to send ACFP traps.
Use the undo snmp-agent trap enable acfp command to disable the
switch from sending ACFP traps.
By default, a switch is enabled to send ACFP traps.
Description
ACFP client working mode
supported by the ACFP server:
ipserver: host mode
■
redirect: redirect mode
■
mirror: mirror mode
■
Maximum expiration time (in
seconds) of the collaboration policy
supported by the server
Whether the server supports
permanent collaboration rules
switch-context: The packet carrying
the context ID is applicable on a
switch.
39