Display Cpu; Display Device - 3Com 8807 Command Reference Manual

display cpu

Syntax
display cpu [slot slot-no ]
View
Any view
Parameter
slot slot-no: Specifies the module number.
Description
Use the display cpu command to display CPU occupancy.
Example
# Display CPU occupancy on slot 0.
<SW8800> display cpu slot 0
slot 0 CPU busy status:
Table 138 Description on the fields of the display cpu command
Field
slot 0 CPU busy status:
6% in last 5 seconds
7% in last 1 minute
12% in last 5 minutes

display device

Syntax
display device [ detail | [ shelf shelf-no ] [ frame frame-no ] [ slot slot-no ] ]
View
Any view
Parameter
detail: displays all slot detail information.
shelf-no: Shelf number.
frame-no: Frame number.
slot-no: Slot number.
Description
Use the display device command to display the module type and working status
information of a card, including physical card number, physical daughter card
number, PCB version number, hardware version number, FPGA version number,
version number of BOOTROM software, application version number, address
learning mode, interface card type and interface card type description, and so on.
6% in last 5 seconds
7% in last 1 minute
12% in last 5 minutes
Description
CPU usage of switch
CPU usage in last 5 seconds is 6%.
CPU usage in last 1 minute is 7%.
CPU usage in last 5 minutes is 12%.
983