Startup Saved-Configuration - 3Com 5500-EI PWR Reference Manual

<Sysname> save unit1>flash:/234.cfg
The current configuration will be saved to unit1>flash:/234.cfg [Y/N]:y
Now saving current configuration to the device.
Saving configuration. Please wait...
...........
Unit1 save configuration unit1>flash:/234.cfg successfully

startup saved-configuration

Syntax
startup saved-configuration cfgfile [ backup | main ]
undo startup saved-configuration [ unit unit-id ]
View
User view
Parameters
cfgfile: Path name or file name of a configuration file in the Flash, a string of 5 to 56 characters.
backup: Specifies the configuration file to be the backup configuration file.
main: Specifies the configuration file to be the main configuration file.
unit unit-id: Specifies a switch by its unit ID. You can configure a switch in the fabric to use null
configuration when it restarts by specifying the switch unit ID in unit unit-id.
Description
Use the startup saved-configuration command to specify a configuration file to be the main
configuration file or the backup configuration file to be used for the next startup of the switch.
Use the undo startup saved-configuration command to specify a switch to use null configuration
when it restarts.
Note that:
If you execute the startup saved-configuration command with neither the backup nor the main
keyword specified, the configuration file identified by the cfgfile argument is specified as the main
configuration file to be used for the next startup of the switch.
If the switch has not joined any fabric, the startup saved-configuration command specifies the
configuration file to be used for the next startup of the switch; if the switch has joined a fabric, this
command specifies the configuration file to be used for the next startup of all the switches in the
fabric.
If the switch has joined a fabric, without the unit keyword, the undo startup saved-configuration
command will specify all the switches in the fabric to use null configuration when they restart; with
the unit keyword specified, this command will specify the specified unit in the fabric to use null
configuration when it restarts.
1-13