Setting To Output System Information To The Trap Buffer; Setting To Output System Information To The Log Buffer - 3Com 4210 PWR Configuration Manual

n
Setting to Output
System Information to
the Trap Buffer
Setting to Output
System Information to
the Log Buffer
Table 349 Set to output system information to a log host
Operation
Configure the output rules of
system information
Set the format of the time
stamp to be sent to the log
host
Be sure to set the correct IP address when using the info-center loghost
command. A loopback IP address will cause an error message prompting that this
address is invalid.
Table 350 Set to output system information to the trap buffer
Operation
Enter system view
Enable the information center info-center enable
Enable system information
output to the trap buffer
Configure the output rules of
system information
Set the format of time stamp
in the output information
Table 351 Set to output system information to the log buffer
Operation
Enter system view
Enable the information center info-center enable
Enable information output to
the log buffer
Information Center Configuration
Command
info-center source {
modu-name | default }
channel { channel-number |
channel-name } [ { log | trap |
debug } { level severity |
state state } ]*
info-center timestamp
loghost { date |
no-year-date | none }
Command
system-view
info-center trapbuffer
[channel { channel-number |
channel-name } | size
buffersize]*
info-center source {
modu-name | default }
channel { channel-number |
channel-name } [ { log | trap |
debug } { level severity |
state state } ]*
info-center timestamp { log
| trap | debugging } { boot |
date | none }
Command
system-view
info-center logbuffer [
channel { channel-number |
channel-name } | size
buffersize ]*
461
Description
Optional
Refer to Table 345 for the
default output rules of system
information.
Optional
By default, the time stamp
format of the information
output to the log host is date.
Description
-
Optional
Enabled by default.
Optional
By default, the switch uses
information channel 3 to
output trap information to the
trap buffer, which can holds
up to 256 items by default.
Optional
Refer to Table 345 for the
default output rules of system
information.
Optional
By default, the time stamp
format of the output trap
information is date.
Description
-
Optional
Enabled by default.
Optional
By default, the switch uses
information channel 4 to
output log information to the
log buffer, which can holds
up to 512 items by default.